2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Dele

page_0026.png__PID:8dcf0a7a-3baa-4793-bc78-a4235866728d

TruckTok 2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Delete Kit

Improve the performance of your motor!

Shop Now

How it Installation?

0_s.png__PID:903be947-b880-40e0-a01f-bbf9d4cf258f

Step 1

1. Disconnect the battery. 2. Drain the coolant. 3. Remove intake resonator By loosening hose clamp and Suppor bolt.

2_s.png__PID:8793fc78-a423-4866-b28d-d209f8aadb72

Step 2

1.Disconnect the mass air flow sensor. Remove the intake tube by loosening the hose clamps on the intake tube. 2.Remove the zipper and unplug the wire from the intake pipe.

43343443.png__PID:a4235866-728d-4209-b8aa-db724119fa3c

Step 3

1.Remove the intake pipe fixed by one hose clamp and six bolts. Note: keep debris out of the intake system. 2.Remove the PCV hose on the passenger side of the truck.

10_s.png__PID:728dd209-f8aa-4b72-8119-fa3c91aaa5fb

Step 4

Remove the 4 bolts and nuts that secure the EGR valve to the motor. Disconnect all coolant lines leading to the EGR cooler. Now the Entire EGR assembly can be pulled out.

15_s.png__PID:f8aadb72-4119-4a3c-91aa-a5fb62be90a7

Step 5

Install the exhaust block using the provided 20mm and 30mm bolts. All bolts will be installed from the back of the baffle.

6666_s.png__PID:40fdc70c-3c4b-4e30-815c-b2dddea9d3a6

Step 6

Replace the EGR coolant pipeline with the provided coolant pipeline. This will reconnect the coolant from the return pipe to the thermostat.Install the new intake pipe onto the engine.
Add the coolant in the reverse order, reinstall the intake pipe, PCV hose, wiring, etc., and check for any leaks.

TruckTok 2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Delete Kit

0%, only 916 left

TruckTok 2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Delete Kit

$128.99

Material: Aluminum alloy,Stainless steel,Silica gel
Improve fuel economy and engine longevity, restore overall fuel efficiency.
Reduce engine temperature and remove the possibility of some damage.
Be used in gasoline and Diesel engines and more efficiently than stock EGR system.
Recirculate engine coolant faster, clean intake air and increase horsepower.
Eliminate soot build up and delete clogged EGR valves.
Fitment: 2006-2007.4 6.6L Chevrolet/GMC 2500HD/3500HD V8 Diesel Turbo
Instruction Manual page: Click This

Quantity

Related products

0128.png__PID:4218f467-cc7d-4b62-b828-b6005a87c9cd

2004-2010 6.6L GMC Chevrolet Duramax CCV PCV Reroute Ventilation diesel Kit

$79.99

579A0580_695x695.webp__PID:162381cb-5f51-48ea-8679-ce432cd5eea8

2001-2007 6.6L GM Duramax LB7 LLY LBZ 5" Downpipe Back DPF Delete Pipe

$749.00

0009.png__PID:22bbe032-29e6-4363-9088-df90dad2fd15

2001-2016 6.6L Chevy GMC Duramax LB7 LLY LBZ LMM LML Exhaust Up-Pipe

$108.99

1_5fa62deb-fab7-4761-9d5d-9bedebf7dfb7_695x695__PID:05c4b417-b17b-47d8-8bbb-e9587c631141

2004.5-2010 LLY LBZ LMM 6.6L Duramax Diesel 3" Downpipe Exhaust

$134.99

TruckTok 2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Delete Kit

How it Installation?

Step 1

1. Disconnect the battery. 2. Drain the coolant. 3. Remove intake resonator By loosening hose clamp and Suppor bolt.

Step 2

1.Disconnect the mass air flow sensor. Remove the intake tube by loosening the hose clamps on the intake tube. 2.Remove the zipper and unplug the wire from the intake pipe.

Step 3

1.Remove the intake pipe fixed by one hose clamp and six bolts. Note: keep debris out of the intake system. 2.Remove the PCV hose on the passenger side of the truck.

Step 4

Remove the 4 bolts and nuts that secure the EGR valve to the motor. Disconnect all coolant lines leading to the EGR cooler. Now the Entire EGR assembly can be pulled out.

Step 5

Install the exhaust block using the provided 20mm and 30mm bolts. All bolts will be installed from the back of the baffle.

Step 6

Replace the EGR coolant pipeline with the provided coolant pipeline. This will reconnect the coolant from the return pipe to the thermostat.Install the new intake pipe onto the engine.
Add the coolant in the reverse order, reinstall the intake pipe, PCV hose, wiring, etc., and check for any leaks.

TruckTok 2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Delete Kit

Related products

2004-2010 6.6L GMC Chevrolet Duramax CCV PCV Reroute Ventilation diesel Kit

2001-2007 6.6L GM Duramax LB7 LLY LBZ 5" Downpipe Back DPF Delete Pipe

2001-2016 6.6L Chevy GMC Duramax LB7 LLY LBZ LMM LML Exhaust Up-Pipe

2004.5-2010 LLY LBZ LMM 6.6L Duramax Diesel 3" Downpipe Exhaust

Blog posts

Exhaust System Leak Repair: Step-by-Step Guide to Finding and Fixing It

How to Enhance Your Diesel Performance？

Guide to Best LLY Duramax EGR Delete Kits

Added to your cart:

Let customers speak for us

How it Installation?

Step 1

1. Disconnect the battery. 2. Drain the coolant. 3. Remove intake resonator By loosening hose clamp and Suppor bolt.

Step 2

1.Disconnect the mass air flow sensor. Remove the intake tube by loosening the hose clamps on the intake tube. 2.Remove the zipper and unplug the wire from the intake pipe.

Step 3

1.Remove the intake pipe fixed by one hose clamp and six bolts. Note: keep debris out of the intake system. 2.Remove the PCV hose on the passenger side of the truck.

Step 4

Remove the 4 bolts and nuts that secure the EGR valve to the motor. Disconnect all coolant lines leading to the EGR cooler. Now the Entire EGR assembly can be pulled out.

Step 5

Install the exhaust block using the provided 20mm and 30mm bolts. All bolts will be installed from the back of the baffle.

Step 6

Replace the EGR coolant pipeline with the provided coolant pipeline. This will reconnect the coolant from the return pipe to the thermostat.Install the new intake pipe onto the engine.Add the coolant in the reverse order, reinstall the intake pipe, PCV hose, wiring, etc., and check for any leaks.

TruckTok 2006-2007 6.6L Chevy Silverado Classic GMC Duramax LBZ Diesel EGR Delete Kit

Related products

Blog posts

Let customers speak for us

Replace the EGR coolant pipeline with the provided coolant pipeline. This will reconnect the coolant from the return pipe to the thermostat.Install the new intake pipe onto the engine.
Add the coolant in the reverse order, reinstall the intake pipe, PCV hose, wiring, etc., and check for any leaks.