FITMENT
- 1999-2016 Ford F250 F350 F450 Super Duty 8Ft Bed Styleside long box.
DESCRIPTION
Product Overview
- The 8-foot bed on a 1999-2016 Super Duty is a serious work platform — and this cover is sized to match. Spanning 98.1 inches from bulkhead to tailgate, the TruckTok 8ft Soft Roll-Up Tonneau uses reinforced cross-bows and heavy-duty PVC fabric to keep the cover tight and flat across the full length. No sagging in the middle, no ballooning at highway speed — just reliable protection for your cargo from the job site to the highway.
- For contractors, farmers, and anyone running a long-bed Super Duty, the roll-up design is essential. You can’t tilt a hard cover out of the way when there’s a gooseneck trailer behind you. You can’t stack tri-fold panels when you need every inch of bed. But a soft roll-up? Release the latches, roll it forward, and you’ve got the whole 8 feet ready to work.
Key Features
- 8ft Long-Bed Engineering Cover length, bow spacing, and rail rigidity specifically designed for the 98.1-inch span. More bows, tighter tolerance — not a stretched 6.8ft cover.
- Reinforced PVC Construction Thick, double-sided vinyl with extra stitching at stress points. Built to handle the larger surface area and higher wind loads of an 8ft cover.
- Heavy-Gauge Aluminum Side Rails Overbuilt rail profile resists flexing across the full 8ft bed length. Won’t bow or warp under tension — critical for maintaining a tight seal.
- Quick Roll-Up for Towing Rolls to the cab in seconds when you need to hitch up a gooseneck or fifth-wheel. No panels to remove and store while you’re hooked to a trailer.
- No-Drill Clamp-On Installation Mounts to factory bed rails with the included hardware. Install in about 30-40 minutes — the extra length adds a few minutes for positioning, but the process is the same.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
8FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: Does the extra length make the cover harder to roll up by myself?
A: It’s more fabric to manage, but the process is the same. Walk the cover forward as you roll — don’t try to roll the whole 8 feet from the tailgate. Most owners figure out a smooth one-person technique after the first few uses.
Q: Will an 8ft cover sag more than a shorter one?
A: Not when installed correctly. This cover includes additional cross-bows and tension points specifically for the 8ft span. Take your time adjusting the tension during installation — a properly tensioned 8ft cover sits just as flat as a 5.5ft cover.
Q: Can I open just the tailgate end without rolling the whole cover?
A: Yes. The cover latches independently at the tailgate, so you can open it partially for quick access without unrolling the entire cover. Handy for tossing in a tool or grabbing something near the tailgate.
Q: Does the cover clear a gooseneck hitch ball when rolled up?
A: When rolled up against the cab, the cover bundle sits forward of most gooseneck hitch locations. You can hitch and unhitch with the cover rolled. You won’t be able to close it while a trailer is connected — standard for any full-bed tonneau.
Q: Need a cover for a different Super Duty or a shorter bed?
A: For 2017-2025 Super Duty 8ft beds, see our newer-gen Super Duty 8ft cover. For 6.8ft beds, we carry 1999-2016 and 2017-2025 options.
