FITMENT
- 2014-2025 Chevy Silverado Sierra 1500
- 2014-2019 2500HD 3500 HD 6.5/6.6 FT Bed. Not for CarbonPro Bed.
DESCRIPTION
Product Overview
- The K2XX platform’s 6.5ft bed is the workhorse configuration — and this cover fits 1500s and HDs alike. The TruckTok 6.5ft Soft Roll-Up Tonneau spans the full bed with heavy-duty PVC fabric, cross-bow reinforcement, and aluminum rails built for the K2XX bed rail profile. Whether your truck is a weekend hauler or a daily work rig, this cover keeps cargo protected while adding a clean, finished look.
- The roll-up advantage means you never have to choose between protection and access. Hauling tall items? Roll it up. Locking up tools? Roll it down. The whole operation takes seconds and doesn’t require removing a single component.
Key Features
- K2XX Dual-Fit Design Engineered for both 1500 and HD models on the K2XX platform. One cover, clean fit — no adapters or shims needed.
- Reinforced Mid-Span Support Bow placement optimized for the 6.5ft length. Prevents sagging and water pooling — keeps the cover tight and flat season after season.
- UV-Treated PVC Fabric Heavy-duty double-sided vinyl resists sun damage, cracking, and fading. Maintains its black finish through years of outdoor exposure.
- Corrosion-Resistant Hardware Aircraft-grade aluminum rails with electroplated steel clamps. Built to handle humidity, road salt, and coastal environments.
- Full Roll-Up Bed Access Pop the tailgate latches and roll the cover to the cab. Full 6.5ft of bed access in under 30 seconds. Side rails stay mounted — nothing to remove or store.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
6.5FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: Does this fit the 2015 Silverado 2500HD and the 2018 Silverado 1500?
A: Yes. Both use the same bed rail dimensions on the K2XX platform. This cover fits all K2XX 1500 and 2500HD/3500HD models with the 6.5ft/6.6ft standard bed.
Q: How does the cover seal against the tailgate on HD models?
A: The tailgate seal sits against the top edge of the closed tailgate, regardless of whether it’s a 1500 or HD. The HD tailgate is heavier, but the top edge geometry is the same — so the seal is identical.
Q: Can I use this cover with the factory spray-in bed liner?
A: Yes — spray-in liners don’t interfere with the bed rail lip where the clamps mount. If the liner material is extra thick near the clamp points, you may feel slightly more resistance when tightening.
Q: Does the cover work with a bed extender?
A: In most cases, yes. Bed extenders typically mount near the tailgate or to the bed floor. As long as the extender doesn’t clamp to the top of the bed rail where the cover rails sit, there’s no conflict.
Q: Need a K2XX cover for a short bed or a newer T1 platform model?
A: For K2XX 5.8ft short beds, see our K2XX 5.8ft cover. For 2019-2025 T1 platform trucks, check out our T1 5.8ft and T1 HD covers.
