FITMENT
- 2019-2025 Dodge Ram 1500 (ONLY FIT New Body Style，Not for Classic), 6.4'(76") without Rambox!
- Cab size does not matter as long as you have the correct model and bed size.
DESCRIPTION
Product Overview
- The 5th Gen Ram 1500 brought a redesigned bed with updated rail geometry — and this cover is engineered specifically for it. The TruckTok 6.4ft Soft Roll-Up Tonneau fits the 2019-2025 New Body Style Ram 1500 with precision, using a rail profile contoured to the updated bed caps. Same no-drill clamp-on installation, same heavy-duty PVC fabric, same full roll-up access — built for the truck you’re driving today.
- This cover delivers everything a modern Ram owner needs: weather protection that doesn’t quit, a low-profile fit that looks factory, and the ability to roll the whole thing up in seconds when you need to haul something tall. It’s the sweet spot between an expensive hard cover and going without protection at all.
Key Features
- 5th Gen Precision Fit Rail profile and clamp geometry designed specifically for the 2019+ Ram 1500 New Body bed — no guessing, no shimming, no returns because it “almost” fits.
- Modern Low-Profile Styling Sits nearly flush with the bed caps for a clean, integrated look that complements the 5th Gen Ram’s updated exterior design.
- Heavy-Duty PVC with UV Inhibitors Treated to resist fading and material breakdown under prolonged sun exposure — looks good year after year, not just the first summer.
- Full-Bed Roll-Up Access Releases in seconds and rolls to the cab for 100% bed access. No panels to remove, no hardware to store — just roll and go.
- Clamp-On No-Drill Mounting Uses factory bed rail mounting points. Everything needed is in the box. Most owners finish installation in 20-30 minutes.
- Aircraft-Grade Aluminum Rails Corrosion-resistant aluminum side rails with electroplated clamps that won’t rust or seize — clean removal if you ever need to take the cover off.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
6.4FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: How do I know if I have the “New Body” or “Classic” Ram 1500?
A: The New Body (5th Gen) has a completely redesigned exterior with a larger grille and smoother body lines. The Classic looks like the previous-generation Ram. If your truck was sold as a 2019-2024 “Classic” model or looks like a 2009-2018 Ram, this cover won’t fit — you’ll need our standard Ram 6.4ft cover.
Q: Will this fit with the factory bed utility group / bed rails?
A: The cover clamps to the inside lip of the bed rail. Factory bed utility rails may interfere with clamp placement — remove or adjust the utility rails before installing the tonneau cover.
Q: Can I go through a car wash with this cover on?
A: Touchless car washes are fine. Avoid brush-style washes — the brushes can catch on the cover edges and potentially damage the fabric or pull it loose from the rails.
Q: How tight should the cover be after installation?
A: You want it tight enough that there’s no visible sag and minimal flutter at highway speed, but not so tight that it’s difficult to latch at the tailgate. The tension is adjustable — start snug and fine-tune after a few drives.
Q: Need a cover for a different Ram bed size or a different truck brand?
A: For the Ram 5.7ft short bed, check out our Ram 1500 5.7ft cover. For Ford or Chevy trucks, browse our full tonneau cover collection.
