FITMENT
- 2015-2025 Ford F150 6.5Ft Bed Styleside models without Ford Track System.
DESCRIPTION
Product Overview
- The 2015+ F-150 with the 6.5ft bed hits the sweet spot — enough length for serious hauling without the footprint of a long bed. The TruckTok 6.5ft Soft Roll-Up Tonneau is built for this exact configuration, with a rail profile matched to the aluminum-body F-150’s bed geometry. Heavy-duty PVC fabric, reinforced cross-bows, and adjustable tension keep the cover tight and quiet from the job site to the interstate.
- The roll-up design is what makes this cover a daily driver’s best friend. Need to grab a sheet of plywood after work? Roll it up. Hauling mulch on Saturday? Roll it up. Sunday tailgate? Roll it back down. No tools, no panels, no excuses — just functional cargo protection that gets out of your way when you need it to.
Key Features
- Aluminum-Body F-150 Rail Match Clamp geometry calibrated to the 2015+ F-150’s aluminum bed rails. Secure grip without damaging the softer aluminum bed lip.
- Reinforced 6.5ft Span Cross-bows and adjustable tension tuned for the 78.9-inch bed. Stays flat and tight at highway speeds — no ballooning, no excessive flutter.
- UV-Stabilized PVC Fabric Treated for prolonged sun exposure without significant fading or material degradation. Looks clean and black season after season.
- Full Roll-Up, Full Access Unlatch, roll, strap, done — under 30 seconds to full bed access. The side rails stay mounted, so you’re not reinstalling anything.
- No-Drill Installation Clamps directly to factory bed rails. Basic socket set, 20-30 minutes, one person — though a second set of hands makes positioning the fabric easier on the 6.5ft span.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
6.5FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: Does this cover fit the F-150 with the Pro Power Onboard generator?
A: The cover itself doesn’t interfere with Pro Power Onboard. However, if your generator panel or outlet is mounted inside the bed, make sure the cover’s rolled position and side rails don’t block access to the panel. In most configurations, there’s no issue.
Q: Can I use this cover with a spray-in bed liner?
A: Yes — in fact, it works great with spray-in liners. The clamps grip the metal bed rail lip, not the liner surface. If the liner material is extra thick near the rail lip, you may feel slightly more resistance when tightening the clamps.
Q: Is the 6.5ft cover noticeably louder than the 5.5ft at highway speed?
A: With proper tension adjustment, there’s no meaningful difference. The cross-bows and adjustable tension system keep the fabric flat. If you hear flapping, tighten the tailgate latch — that’s usually all it takes.
Q: How does the cover handle automatic car washes?
A: Touchless washes are fine. Avoid brush washes — the spinning brushes can catch the cover edge and potentially tear the fabric or pull it out of the rail channel.
Q: Need a cover for a different F-150 or Super Duty?
A: For F-150 5.5ft beds, see our 2015-2025 5.5ft cover. For Super Duty, we carry 6.8ft and 8ft options. Browse our full tonneau cover collection.
