FITMENT
- 2004-2014 Ford F150 6.5Ft Bed Styleside models without Ford Track System.
DESCRIPTION
Product Overview
- The 6.5ft bed on the 2004-2014 F-150 gives you that extra foot of cargo space — and this cover protects every inch of it. The TruckTok 6.5ft Soft Roll-Up Tonneau spans the full 78.9 inches with reinforced PVC fabric and rigid aluminum side rails, sealing out weather while keeping your gear out of sight. At this bed length, the roll-up advantage really shines: when you need to haul a dirt bike, fridge, or load of mulch, the cover rolls completely out of the way.
- The clamp-on rail system installs in about half an hour with no drilling. Whether your 2004-2014 F-150 is a work truck running job sites or a weekend warrior hauling toys, this cover adds everyday protection without everyday hassle.
Key Features
- 6.5ft Bed-Specific Engineering Cover length, bow spacing, and tension tuning calibrated for the 78.9-inch span — not a short-bed cover that was stretched to fit.
- Heavy-Duty PVC with Cross-Bow Support Reinforced bows maintain fabric tension across the longer span, preventing sagging in the center and reducing wind lift on the highway.
- Aircraft-Grade Aluminum Side Rails Corrosion-proof aluminum rails with electroplated clamps. Built to outlast the truck, not rust out after two winters.
- Full Roll-Up Bed Access Rolls to the cab in seconds for 100% bed access. Haul tall items without removing anything — the side rails stay put, the cover rolls forward.
- No-Drill Clamp-On Mounting Secures to factory bed rails with the included clamp kit. Zero permanent modifications. Removable in minutes if needed.
- Weather-Channel Rail Design Integrated rail channels direct water toward the bed corners rather than pooling on the cover surface — especially helpful on longer covers.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
6.5FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: Will this cover sag in the middle because it’s longer?
A: With proper tension adjustment, no. The cross-bows support the PVC fabric across the 6.5ft span, and the adjustable tailgate tension lets you dial out any slack. If it sags after installation, tighten the tailgate latch adjustment.
Q: Can I install this if I have a plastic bed rail cap?
A: Yes. The clamps are designed to grip the metal lip beneath the plastic bed rail cap. You may need to trim small notches in an over-the-rail bed liner — standard for any clamp-on tonneau cover.
Q: How long does the fabric typically last?
A: The PVC material is UV-treated and weather-resistant. Parking in direct sun year-round will accelerate wear on any soft cover — using a UV protectant spray annually can extend the life.
Q: Can I run this cover with a bed extender or cargo divider?
A: In most cases, yes — as long as the accessory mounts below the bed rail lip. The side rails and clamps occupy the top inch of the bed rail. If your divider clamps in the same spot, you may need to adjust its position slightly.
Q: Need a cover for a different F-150 generation or bed size?
A: For 2004-2014 F-150 with the 5.5ft bed, see our shorter bed cover. For the 2015-2025 F-150, we carry 5.5ft and 6.5ft options.
