Skip to content

11-23 6.7L Powerstroke 4" DPF Delete Pipe

Improve the performance of your motor!

Learn More
0259.png__PID:fd6c0bbb-6810-4140-9d77-138e9b15e0b6

How it Installation?

Installation instructions

0278 2.jpg__PID:3266fcfa-ee99-4832-9c7f-ba95d21a949e

Step 1 :

Disassemble the OEM exhaust system. Starting from the flange end of the downspout, unscrew the flange connection and loosen the clamp at the rear of the particle filter.

Step 2 :

Remove the metal hanger from the OE rubber hanger and the pipeline/sensor from the particle filter. Remove the DPF from the truck.

0278 5.jpg__PID:76083c44-92db-497c-af4a-bad764ec9c68
0278 6.jpg__PID:98f8df63-776f-474f-9fdb-87a13266fcfa

Step 3 :

Install #1 pipe by loosely tighten the flange to the flanged end of downpipe.

Step 4 :

Next, install #2 pipe, placing hanger onto the OEM rubber mount and bolt-ing the flanges together at the rear end.

0278 7.jpg__PID:b1032a37-8417-48f8-9f63-776fa74f9fdb
0278 9.jpg__PID:bad764ec-9c68-4103-aa37-841798f8df63

Step 5 :

Adjust the gap and appearance of the new system when the pipeline installation is loose. Tighten all clamps evenly, starting from the front flange connection and tightening all the way to the back.

Step 6 :

1.Install the bracket. The M10 bolt will be screwed into the support bolt. Secure the transmission dipstick to the bracket using 1/4-20 bolts, nuts, and washers.
2.The bracket will hold the coolant hose connector in place.

0092 6.jpg__PID:69d53a21-0439-4884-b4a8-7ec1a71ab9cd
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4
TruckTok 2011-2023 6.7L Ford powerstroke 4

TruckTok 2011-2023 6.7L Ford powerstroke 4" DPF Delete Pipe SuperDuty Exhaust

$239.49

FITMENT

  • 2011-2023 6.7L Ford Powerstroke F250 F350 F450 Super Duty Diesel Pickup Truck. (Crew cab short bed & crew cab long bed).
  • Note: *This will NOT fit Cab & Chassis commercial style trucks.

DESCRIPTION

Product Overview

  • Factory 6.7L DPF is a maintenance headache—prone to clogging, constant regens, and thousands in repair bills.
  • This 4" mandrel-bent ss delete pipe replaces the restrictive CAT and DPF assembly with a single, free-flowing section.
  • It permanently eliminates regen cycles, prevents DPF failures, and fully restores your engine's true performance and exhaust flow.
Key Features
  • Premium T409 SS: Built to withstand intense  EGTs and harsh road conditions, ensuring rust-resistance and long-term durability.
  • Retains Factory Tailpipe: Precision mid-section replacement. bolts directly to stock rear tailpipe and exhaust tip, saving the high cost of a full-length exhaust system.
  • Eliminate Sensor Failures: Factory DPF relies on 4 fragile sensors that constantly rust, fail, and trigger "Limp Mode." This straight pipe eliminates these failure points entirely.
  • Unlock VGT Turbo Whistle: Ditch the factory restriction. Our 4" smooth pipe unleashes a deep V8 growl and the iconic Ford turbo whistle under acceleration.
  • Drop Towing EGTs: Removed the restrictive DPF container, exhaust gases escape instantly. This dramatically lower EGTs under heavy towing to protect your turbo and extend engine life.

FAQ

Q:Can I install this pipe without a tuner, or will it throw codes?

A:No, a tuner is required. Removed the factory exhaust eliminates the emissions sensors. must install a compatible delete tune to prevent a Check Engine Light or "Limp Mode." Mini Maxx Tuner V2 to shut off the sensors, clear all codes.

Q:What should I do with the DEF tank after installing

A:Once your truck is tuned and this pipe is installed, the DEF system is completely disabled. You can leave the DEF tank on the truck empty, or completely unbolt and remove the tank to save weight and clear up under-truck space.

Q:Do I need to re-install or plug in factory exhaust sensors into pipe?

A:No. This is a straight pipe without sensor bungs. Once tuned truck, your computer turns off these sensors. You can simply unplug and remove the factory harness, or safely zip-tie it out of the way.

Q:Will this 4" pipe make my truck louder, or do I need a 4" or 5" full exhaust for that?

A:This 4" Pipe uncages the turbo whistle with your stock tailpipe; upgrade to the 4" Full Exhaust for a complete, drone-free towing setup; or grab the 5" Full Exhaust if you want maximum flow and the deepest, loudest V8 diesel roar

View Details

Other Related products

Discover unique designs you'll need

1.webp__PID:bfa7b262-9093-4735-a7ec-640ec45c86cc

EGR Delete Kit

2011-2023 6.7L Ford Powerstroke

23.webp__PID:ee043a10-9e50-4179-80b6-8fe8fd1af35c

CCV Reroute Ventilation

2011-2023 6.7L Ford Powerstroke

46.webp__PID:55c69fb9-cb02-45f2-9142-74b9f83d281f

EGR Cooler Delete Kit

2011-2023 6.7L Ford Powerstroke

1 拷贝 2.png__PID:d545ca26-d83c-4834-b869-bf10c1460cb2

Tonneau Covers

Ford Powerstroke

79.webp__PID:235aa586-cd91-4f4a-bc67-fb6cc4ee0006

5" Dp-Back DPF Delete

2011-2022 6.7L Ford Powerstroke

13.webp__PID:f4f8c349-4b11-4ca2-8384-4ccced0f209f

DPF/EGR/DEF/CCV 

2011-2019 6.7L Ford Powerstroke