DP-0310 2014-2018 3.0L RAM 3" Ecodiesel DPF Delete Pipe

14-18 3.0L RAM 3" Ecodiesel DPF Delete Pipe

Improve the performance of your motor!

0310 10.png__PID:9734019b-5729-428f-adcb-9a0d9e2d1801

How it Installation?

Installation instructions

0310 2.jpg__PID:c368c1b0-cde7-49f1-9d3a-16c9da8ecfc2

Step 1 :

Disconnect all sensors and DEF injectors on the downspouts, SCR, and diesel particulate filters.remove the exhaust pipe out from under the truck and the muffler assembly.

Step 2 :

Install the # 1 downspout using the previously removed factory V-clamp. Do not fully tighten the V-belt clamp at this time, as it may requireadjusting the drain pipe.

0310 6.jpg__PID:cfc24d3c-720a-4a9d-950a-7e944b86aa65

0310 7.jpg__PID:ea9dd50a-7e94-4b86-aa65-13eee5c028ba

Step 3 :

Install the provided # 2 intermediate pipe, ensuring that the hanger is placed in the factory liner on the frame. The hanger should point towards the front of the vehicle.

Step 4 :

Install tube # 3 and slide the long end into the end of tube # 2. Attention: If your vehicle has a shorter carriage (5 * 7 inches), you need to cut 7 inches from the front end pipe (do not approach the hanger). This end slides into the muffler assembly.

0213 9.jpg__PID:97f88895-2121-4f9e-ac74-2f6c1411c6a1

0310 9.jpg__PID:e5c028ba-d02f-4b5a-8805-258c6ac71138

Step 5 :

Next, install the factory muffler assembly to the end of pipe # 3 and install the exhaust pipe to the outlet of the muffler assembly.

Step 6 :

1.Install the bracket. The M10 bolt will be screwed into the support bolt. Secure the transmission dipstick to the bracket using 1/4-20 bolts, nuts, and washers.
2.The bracket will hold the coolant hose connector in place.