How it Installation?
Installation instructions
Step 1 :
Dismantle the coolant pipeline or EGR cooler
Step 2 :
Connect the O-ring washer to the cooler adapter with screws. Loosen the screws of the riser, insert the connected cooler adapter into the pipeline, and place the O-ring on the screws of the riser.
Step 3 :
Connect the cooling pipe to the cooling adapter and secure it with the clamp provided in the kit.
Step 4 :
The installation of the EGR removal kit has been completed and can be tested. Start the engine and run it until the coolant circulates. If necessary, fill up the cooling system and carefully check for leaks.
Step 5 :
Remove the position of the lower coolant pipe from the hard pipe, use one of the provided hose clamps to secure the provided hose to the hard pipe, and reconnect the large electrical connector to the new bracket. Tie any remaining wiring to the bracket to ensure that it does not Damaged.
Other Related products
Discover unique designs you'll need
EGR Throttle Delete Kit
2013-2018 6.7L RAM Cummins
CCV Crankcase Ventilation
2007.5-2018 6.7L RAM Cummins
EGR Throttle Delete Kit
2007-2018 6.7L RAM Cummins
3.5" Intake Manifold Tube
2007-2018 6.7L RAM Cummins
5" Turbo Back DPF Delete Pipe
2013-2018 6.7L RAM Cummins
