FITMENT
- 2007-2013 Silverado Sierra 1500 2500HD 3500 HD 8Ft Bed.
- Fits Fleetside / Styleside Models Only
DESCRIPTION
Product Overview
- The GMT900 long bed is a serious tool — 8 feet of cargo space that demands a cover built to handle the span. The TruckTok 8ft Soft Roll-Up Tonneau spans the full 97.8 inches with reinforced PVC fabric, additional cross-bows, and heavy-duty aluminum rails designed to keep the cover tight and flat across the extended length. For work trucks, farm trucks, and anyone who needs every inch of that 8-foot bed, this cover delivers protection without getting in the way.
- The roll-up design is the only practical choice for an 8-foot bed. You can’t tilt a hard cover when you’re loading from the side. You can’t fold panels when you need the whole bed. But rolling this cover to the cab takes seconds — and gives you back all 8 feet to do what you bought the truck for.
Key Features
- Long-Bed Specific Engineering Extra cross-bows and reinforced stitching to handle the 97.8-inch span. No sagging, no water pooling — engineered for the length, not stretched from a shorter design.
- Heavy-Duty PVC Construction Thick, double-sided vinyl with additional UV inhibitors for trucks that spend their days in the sun. Tough enough for farm and job-site use.
- Oversized Aluminum Side Rails Heavier-gauge rail profile maintains rigidity across the full 8ft length. Won’t flex or bow under tension.
- Complete Roll-Up Bed Access Rolls to the cab in seconds — all 8 feet of bed fully accessible. Load lumber, hay bales, or pallets without removing a thing.
- No-Drill Clamp-On Installation Mounts to factory bed rails. All hardware included. Install in about 35-45 minutes — the extra length adds a few minutes, not complexity.
- Multi-Point Tension Control Adjustable tension at the tailgate latch keeps the long-span fabric tight and reduces flutter at highway speeds.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
8FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: Is the 8ft cover significantly harder to roll up than a short-bed cover?
A: There’s more fabric, so it takes a little more time and arm movement — but the technique is the same. Walk the cover forward as you roll instead of trying to roll the whole thing from the tailgate. Most owners develop a smooth rhythm after the first week.
Q: Will the long cover hold up to livestock or farm use?
A: The PVC fabric and aluminum rails are tough, but a soft cover isn’t designed for direct contact with animals. It will protect cargo from weather and keep feed or supplies secure. If cattle or horses will be leaning over the bed rails, a soft cover isn’t the right choice.
Q: Can I partially open the cover from the tailgate end only?
A: Yes. The cover latches independently at the tailgate, so you can open just the rear section for quick access. This is handy for grabbing tools or supplies near the tailgate without unrolling the full 8 feet.
Q: Does the cover interfere with the stake pockets on GMT900 trucks?
A: The side rails sit inside the bed rail, below the stake pocket openings. In most cases, stake pocket access is maintained. If your stake pocket accessories extend below the bed rail lip, they may contact the cover rails.
Q: Need an 8ft cover for a newer Silverado/Sierra or a different bed size?
A: For 2014-2025 Silverado/Sierra 8ft beds, see our K2XX/T1 8ft cover. For GMT900 short beds, check out our 5.8ft and 6.5ft covers.
