Skip to content
Warranty Shipping Contact Reviews Blogs

Frequently Asked Questions

2007-2010 6.6L Duramax LMM

An LMM delete kit typically includes exhaust piping, EGR delete components, and hardware needed to reduce restriction on the LMM Duramax platform. Some setups may also include downpipes or intake-related components depending on the configuration. Trucktok delete kit options are designed to support improved airflow and lower EGTs.
The 6.6L LMM Duramax engine is equipped with a DPF system that requires frequent regeneration cycles to burn off soot. This process can lead to increased fuel consumption and reduced efficiency, especially during short trips or heavy-duty use.
Power loss in the LMM Duramax is often caused by restricted airflow, clogged EGR systems, and soot buildup from the DPF. These issues increase backpressure and EGTs, reducing engine efficiency and overall performance.
Choosing the right LMM delete kit depends on your goals, such as lowering EGTs, improving airflow, or reducing carbon buildup. Towing setups usually prioritize heat control and stable exhaust flow, while performance builds focus on freer intake and exhaust efficiency. Trucktok kit options are designed for different driving and workload needs.
Oil buildup in the intake and intercooler of an LMM Duramax is mainly caused by the factory PCV system, which routes oil vapor back into the intake. Over time, this leads to oily residue in intercooler boots and intake piping, reducing efficiency and increasing contamination. Upgrading to a PCV reroute or lmm delete kit setup can help keep the intake system cleaner.
Improving airflow on an LMM Duramax involves reducing intake and exhaust restrictions. Upgrades such as high-flow intake components and an optimized exhaust system help the engine breathe more freely, which can lower EGTs and improve overall efficiency. Trucktok offers airflow-focused solutions designed to support better performance under load.
Common issues with the LMM Duramax include high EGTs, reduced fuel efficiency, carbon buildup in the intake, and oil contamination in the intercooler system. These problems are often linked to restrictive factory emissions components. Installing upgraded parts or an lmm delete kit can help reduce these bottlenecks and improve engine performance.

2011-2016 6.6L Duramax LML

The installation time for an LML Duramax Delete Kit depends on experience and tools. Most professional technicians can complete the process in a few hours, while experienced DIYers may need more time. Proper preparation and following the kit instructions help ensure a smooth installation.
When choosing a Delete Kit, focus on build quality, complete hardware and gaskets, clear installation instructions, and compatibility with your vehicle’s year. A well-designed kit ensures proper fit, reliable engine operation, and easier maintenance over time.
Most LML EGR Delete Kits from Trucktok are designed to fit all 2011-2016 6.6L Duramax models. However, to ensure proper fit for your specific year and configuration, please check the product specifications on Trucktok before making a purchase.
When installed correctly, an LML Duramax Delete Kit has minimal impact on engine life. Regular maintenance, including monitoring airflow components and keeping the system clean, helps maintain long-term engine reliability.
Some LML Duramax Delete Kits may perform best with ECU adjustments or tuning, depending on your vehicle’s year, configuration, and the kit type. Trucktok provides detailed instructions with each kit, so following them carefully is recommended. If you are unsure, consulting a professional diesel tuner can help ensure optimal engine performance and prevent check engine lights.
A well-designed Trucktok LML Duramax Delete Kit can help improve throttle response and airflow efficiency while reducing carbon buildup in the engine. The primary goal is to maintain engine reliability and make maintenance easier, rather than providing a dramatic increase in horsepower. Following the installation instructions from Trucktok ensures optimal performance and engine safety.

2013-2018-6-7l-ram-combine-product

A CCV delete kit for 6.7 Cummins converts the closed crankcase ventilation system into an open breather setup, helping reduce oil vapor buildup in the intake system and improving engine cleanliness.
Some Trucktok 2013–2018 6.7L Cummins performance kits are compatible with Cab & Chassis models, including specific applications such as the Trucktok 2013–2018 6.7L Ram 3500 4” Exhaust Tube Pipe (Cab & Chassis EGR Delete) and the Trucktok Cab & Chassis 4-inch DPF Pipe & EGR Cooler Delete Kit. Compatibility depends on the exact product and chassis configuration.
To choose the right parts, make sure they match your 2013–2018 6.7L Cummins model and check whether your truck is a standard Ram 2500/3500 or a Cab & Chassis configuration, since fitment can vary between setups.
2013–2018 6.7L Cummins upgrades can help reduce soot buildup by limiting exhaust gas recirculation and improving airflow through the intake and exhaust systems. Components such as EGR-related upgrades, CCV systems, and freer-flowing exhaust parts help reduce carbon entering the intake tract and keep key engine passages cleaner over time.
Installation time varies depending on the specific kit and your experience level. Many Trucktok 2013–2018 6.7L Cummins kits can be installed in a few hours with basic hand tools, while more complete systems like turbo-back or multi-component delete kits may take longer.
All Trucktok 2013–2018 6.7L Cummins parts are stocked in our US warehouses. Orders placed before the daily cutoff time ship the same day, ensuring fast delivery to get your truck back on the road as quickly as possible.

2013-2018-6-7l-ram-single-product

2013–2018 6.7L Cummins delete kits are performance upgrade systems designed to remove or replace restrictive emissions components such as DPF, EGR, and CCV systems. These kits are built for RAM 2500 and 3500 trucks equipped with the 6.7L Cummins engine.
A Trucktok 6.7 Cummins DPF/EGR delete kit may include DPF delete pipes, EGR delete components, exhaust upgrades, CCV ventilation parts, coolant bypass components, and related installation hardware. The exact contents depend on the specific kit and vehicle configuration.
A 4-inch Cummins exhaust delete kit is generally better for balanced performance and drivability, while a 5-inch system focuses more on maximum exhaust flow and lower restriction for high-performance or heavy-duty applications.
Trucktok 2013–2018 6.7L Cummins delete kits are designed to reduce exhaust restriction and improve airflow through key engine systems. Depending on the kit configuration, such as EGR, DPF, or combined exhaust systems, they can support more efficient engine operation under load.
Many 2013–2018 Cummins performance kits are commonly paired with compatible tuning devices. Trucktok offers supporting products such as the EZ Lynk Auto Agent 3 Tuner, SOTF Switches, Tuner Harness Plug Kits, and EGT Relocation Kits for 6.7L Ram Cummins trucks.
Before installing 2013–2018 6.7L Cummins exhaust upgrades, it is important to ensure proper fitment, understand local regulations, and choose a system that matches your driving needs such as towing, off-road use, or performance applications.

2019-2021-6-7l-ram

2019–2024 6.7L Cummins parts are are used for maintaining, replacing, and upgrading key systems on 2019–2024 RAM 2500 and 3500 6.7L Cummins trucks, including airflow, exhaust, and emissions-related components depending on the part type.
Trucktok offers several types of 2019–2024 Cummins delete kits, including EGR delete kits, DPF delete pipes, DPF and EGR combination kits, turbo-back exhaust systems, and related installation components for 6.7L Ram Cummins trucks. Compatibility may vary by model year and vehicle setup.
Trucktok 2019–2024 Cummins performance parts are often used in towing setups to help the engine maintain more consistent performance under load. By improving airflow and reducing exhaust restriction, these upgrades can support smoother operation during extended towing and heavy hauling conditions.
An EGR delete helps reduce exhaust gas recirculation into the intake system, which can limit soot buildup and help maintain cleaner airflow through the engine over time.
Before installing 2019–2024 Cummins delete kits, it's important to confirm your exact truck configuration (such as standard pickup or Cab & Chassis), choose components that match your specific setup, and understand that installation complexity varies by kit type. Kits that include exhaust, EGR, or CCV components may require more time and basic mechanical experience compared to simpler bolt-on parts.
2019–2024 Cummins performance upgrades from Trucktok can change how the engine manages airflow, exhaust flow, and emissions-related systems. Depending on the components installed, such as EGR, exhaust, or intake-related upgrades, the engine may operate with improved airflow efficiency and reduced restriction in key systems.

Cummins

The best delete kit depends on your truck’s intended use—towing, off-road, or heavy-duty work. TruckTok offers high-quality 6.7L Cummins kits designed for proper fitment, reliability, and compatibility with Cummins engines. Their kits focus on emissions-intact upgrades and supporting tuners, giving you improved performance while maintaining safe and reliable operation.
Yes. Even with a high-quality EGR delete kit, a compatible tuner is needed to optimize engine performance and prevent diagnostic trouble codes (DTCs). TruckTok recommends emissions-intact or off-road tuning solutions to maximize the benefits of the hardware while keeping the engine running safely.
Mechanically, removing the EGR system can help reduce soot buildup and lower intake temperatures, which may improve engine reliability for heavy-duty or off-road use. For those who prefer to keep all systems intact, emissions-intact tuning combined with compatible hardware upgrades from a trusted provider can still enhance performance and drivability.
The DPF (Diesel Particulate Filter) on a 6.7 Cummins can become clogged over time, especially with short trips or low-speed driving. This can lead to reduced power, increased exhaust temperatures, and frequent regeneration cycles. Using high-quality fuel, following proper maintenance schedules, and pairing with emissions-intact performance tuning can reduce DPF issues while maintaining compliance.
The EGR (Exhaust Gas Recirculation) system recirculates a portion of exhaust gases back into the engine’s intake. On a Cummins engine, this lowers combustion temperatures, reduces nitrogen oxide (NOx) emissions, and helps meet emissions regulations. While it serves an environmental purpose, excessive soot buildup from the EGR can affect engine performance over time.
A failing EGR valve can cause rough idling, reduced power, increased smoke, poor fuel economy, and repeated check-engine lights. You might also notice engine surging, stalling, or higher-than-normal soot accumulation in the intake. If these symptoms appear, professional diagnostics are recommended to confirm whether the EGR valve or related components are at fault.
The CCV (Crankcase Ventilation) system manages crankcase pressure and recirculates blow-by gases to prevent oil leaks and maintain turbo efficiency. On Cummins engines, a properly functioning CCV keeps the engine cleaner, reduces oil contamination in the intake, and improves long-term reliability. Some owners install a CCV reroute to reduce intake buildup and enhance performance in heavy-duty applications.
A typical Cummins EGR delete kit includes various components designed to remove or bypass the factory EGR system, improving engine airflow and reducing soot buildup. Key parts of the kit generally include:
  • EGR block-off plates to seal off the intake manifold and exhaust ports
  • Replacement pipes to reroute exhaust gases or eliminate the EGR system
  • Gaskets and mounting hardware for secure installation
  • Tuning solutions (optional) to recalibrate the engine’s ECU for optimal performance after the system removal
These parts work together to help improve engine efficiency by eliminating exhaust gas recirculation and providing cleaner airflow to the engine.

DPF Delete Pipe

A DPF delete pipe is an aftermarket exhaust section designed to replace the factory Diesel Particulate Filter (DPF). Its main effect is to allow exhaust to flow more freely through the system, which can reduce soot accumulation and improve engine efficiency under certain conditions. Similar benefits can often be achieved through proper DPF maintenance and high-quality diesel fuel.
Straight piping and muffler deletes change how exhaust gases flow and can alter sound levels. A straight pipe removes mufflers and may reduce exhaust restrictions, while a muffler delete only removes the muffler and slightly changes sound and flow. For balanced performance, many owners choose aftermarket exhaust systems that improve flow and sound while maintaining system integrity.
Modifying or removing the DPF can change exhaust backpressure, temperature, and overall system behavior, which may affect turbo operation and engine performance. Proper tuning and maintaining system components are key to avoiding potential issues and ensuring long-term reliability.
The main benefits discussed for DPF delete pipes include reduced exhaust restriction, fewer regeneration cycles, and potentially smoother engine operation under heavy load. Similar advantages can often be achieved through timely maintenance, high-quality diesel, airflow improvements, or approved performance upgrades that retain the stock exhaust system.
DPF-related modifications can help the engine run more efficiently by reducing backpressure and soot buildup. Other ways to enhance performance include emissions-compliant tuning, improved cooling systems, turbo upgrades compatible with the engine, high-flow air intakes, and approved aftermarket exhausts, all of which can support better drivability and engine response.
A DPF delete pipe is designed to replace the factory diesel particulate filter and allow exhaust to flow more freely through the system. On off-road vehicles, it can help reduce soot buildup in the exhaust system and simplify maintenance. By improving exhaust flow, it also supports smoother engine operation and more consistent performance under heavy loads or challenging terrain.
Installation of a DPF delete pipe can be done by someone with mechanical experience and the proper tools, but it involves removing parts of the factory exhaust system and ensuring secure connections. For those unfamiliar with exhaust work or engine modifications, professional installation is recommended to ensure proper fitment, secure sealing, and optimal engine operation after the pipe is installed.

Delivery Questions

Yes, shipping is included in our price.

Yes, but we can't change it once we ship it. Because the goods have been out of the warehouse, we can't handle the modification.

We have several warehouses across U.S., therefore, most of our products will be shipped from our local warehouse to clients directly.

We usually send by UPS, USPS, FedEx. You can choose different methods according to your actual needs. Please contact our sales with your requirements within 24 hours after your order is been placed, otherwise, we might ship your order directly from our side with our shipping methods.

When we receive the order, we will process the order within one working day. When the logistics provider picks up the goods from our warehouse, expect delivery within 3-5 working days. We promise 3-5 business days from order to receipt.

Note: Due to weather and location factors, there may be delays, if a delay occurs, please contact us.

Even though we pack and ship your order it doesn’t mean the carrier will pick up at that time. Shipping Carriers only pick up Monday - Friday, not including Holidays. If you receive a tracking number please wait until after 8pm PST on the next business day to see active tracking information.

We support next day delivery. As long as you contact us by email after placing your order, we will give you a quotation for next day delivery. Due to the different location and product size, the freight will be different.

Duramax

You can clean parts of the EGR system externally, but thorough cleaning usually requires removing the valve. Surface cleaning may temporarily improve performance, but it won’t fully remove soot buildup inside the passages. If your EGR is sticking, causing power loss, or triggering codes, professional cleaning or replacement is often more effective than a quick external clean.
Mechanically, removing the EGR on an LML Duramax can reduce soot buildup, lower intake air temperatures, and improve long-term reliability—especially under heavy towing or high-load conditions. Many owners also report cleaner oil, better throttle response, and more stable overall performance. For those who prefer to keep all systems intact, emissions-intact tuning can provide similar improvements in drivability and reliability.
Yes. The 2006–2007 LBZ Duramax does have an EGR system, though it is known for being more reliable than earlier versions. Still, soot accumulation over time can affect airflow and engine efficiency, especially on trucks with high mileage or heavy workloads.
A downpipe improves exhaust flow from the turbocharger, reducing backpressure and helping the turbo spool more efficiently. This can lead to better throttle response, improved towing performance, and lower exhaust gas temperatures (EGTs). Upgrading the downpipe is a common performance enhancement on Duramax engines, especially when paired with proper tuning and supporting hardware.
Yes, removing or bypassing emissions components such as the EGR can help reduce certain maintenance demands. By eliminating these systems, the truck may experience less soot buildup in the intake and exhaust, potentially reducing the frequency of cleaning or servicing related parts. This can make ongoing maintenance more straightforward and help the engine operate more efficiently under various driving conditions.
Installation time varies depending on the engine model, the specific kit, and the installer’s experience. On average, a full Duramax EGR delete kit installation can take several hours, as it involves removing or bypassing multiple components and ensuring proper sealing and fitment. Using the provided hardware and instructions carefully is key to completing the installation efficiently and ensuring the engine runs smoothly after the system is removed.

Duramax-2

Trucktok offers a wide range of parts including EGR delete kits, DPF delete pipes, CCV/PCV reroute kits, and intake and exhaust upgrades—all engineered to maximize airflow and engine performance.
Common issues with Chevy Duramax engines include EGR clogging, excessive soot buildup, and high exhaust gas temperatures. Upgrading with performance parts such as EGR delete kits and optimized exhaust systems can help resolve these problems and improve long-term engine performance.
Choosing the right parts depends on your engine model (such as LBZ, LMM, or L5P) and your goals, whether it's increased horsepower, better towing performance, or improved reliability. Trucktok provides a wide selection of Chevy Duramax parts designed for specific engine types to ensure proper fitment and optimal results.
Yes, a straight exhaust pipe on a Chevy Duramax can significantly improve exhaust flow by reducing backpressure. This allows the engine to breathe more freely, which may enhance throttle response and turbo efficiency. It also produces a deeper, more aggressive exhaust sound that many diesel owners prefer.
Removing restrictive emissions components like the DPF and EGR can improve airflow and combustion efficiency on a Chevy Duramax, which may lead to better fuel economy under certain conditions. Trucktok Duramax solutions help optimize airflow and reduce soot buildup, supporting more efficient engine operation over time.
Yes, upgrading key components can noticeably improve throttle response on a Chevy Duramax. Performance parts that enhance airflow and reduce restriction allow the turbocharger to spool faster, delivering quicker power when accelerating. This results in a more responsive and smoother driving experience.
A turbo-back exhaust system replaces the entire exhaust path from the turbocharger rearward, greatly improving flow on a Chevy Duramax platform. This reduces exhaust restriction, lowers EGTs, and helps the turbo operate more efficiently. Trucktok Duramax exhaust kits are engineered to maximize airflow and support consistent performance gains.

EGR Delete Kits

Mechanically, removing the EGR system can reduce soot buildup and lower intake temperatures, which may help improve engine reliability in high-mileage or heavily loaded trucks. For those who prefer to keep the system intact, emissions-intact tuning can still enhance performance and drivability while keeping all equipment in place.
The main benefits of an EGR delete come from improved throttle response, reduced soot buildup, and better efficiency under heavy load, rather than dramatic raw horsepower increases. It helps the engine run cleaner and may improve overall performance.
Yes. Even with a high-quality EGR delete kit, a compatible engine tune is usually recommended to optimize performance, ensure smooth operation, and prevent engine codes. Tuning can maximize the benefits of the hardware upgrade while keeping the engine running reliably.
Technically, a diesel engine can operate without an EGR valve. Removing or modifying the system may affect how the engine runs and can change soot accumulation or exhaust characteristics. For specialized setups like off-road or competition applications, professional guidance is recommended to ensure engine safety and proper function.
Removing the EGR system can trigger a diagnostic trouble code (DTC) on the engine control module. Using a compatible tune or programmer helps prevent persistent codes and ensures the truck runs smoothly while taking full advantage of the modification.
When selecting an EGR delete kit, consider your truck model, engine type, and how you plan to use it. Choose a kit from a reputable provider, like TruckTok, ensure that it matches your engine specifications and pairs with a compatible tune. Quality construction, precise fitment, and clear instructions or support are key factors for safe installation and long-term durability.
Yes, an EGR delete kit can help reduce carbon buildup in the engine. The EGR system recirculates exhaust gases back into the intake, which can cause soot and carbon deposits to accumulate over time, particularly in the intake manifold and valves. By removing the EGR system, the flow of exhaust gases is eliminated, reducing the chances of buildup and keeping the engine running cleaner. This can also improve overall engine efficiency and longevity.
A typical EGR delete kit includes components designed to replace or bypass the factory EGR system. These parts usually consist of:
  • EGR block-off plates to seal the intake manifold and exhaust ports
  • Replacement pipes to reroute exhaust gases or eliminate them entirely
  • Gaskets and hardware for proper installation
  • Tune or programmer (optional) to recalibrate the engine management system for optimal performance
These components work together to ensure the EGR system is effectively removed, and the engine operates with smoother airflow and reduced exhaust recirculation.

Exhaust Tips

Exhaust tips finish off the exhaust system, guiding gases away from the vehicle to protect paint and trim, and giving the rear a clean, styled look. Made from stainless steel, Trucktok tips also withstand high heat, road salt, mud, and weather.
Exhaust tips don’t change engine performance, but designs with larger outlets or expansion chambers, like Trucktok stainless steel tips, can subtly alter how exhaust gases exit. This changes the sound wave’s path and wavelength, making the exhaust feel deeper and richer without affecting volume or engine operation.
3-inch, 4-inch, and 5-inch exhaust tips mainly differ in size, appearance, and sound characteristics rather than overall performance. A 3-inch exhaust tip offers a smaller, more subtle OEM-style look with little to no change in exhaust sound. A 4-inch tip is the most common option, providing a more aggressive appearance and a slightly deeper tone. A 5-inch tip is significantly larger and is commonly used on diesel trucks, giving the vehicle a bold appearance along with a deeper and louder exhaust note.
Regular cleaning prevents buildup of soot, dirt, and road grime. Use warm soapy water or a mild degreaser, a soft cloth or sponge, and a soft-bristle brush for inside edges. Rinse thoroughly and dry to keep the finish looking new and prevent corrosion. For black exhaust tips, avoid harsh abrasives that may damage the finish. For stainless steel tips, a gentle metal polish can help maintain shine.
Trucktok bolt-on exhaust tips are easy to install with basic hand tools, requiring no welding or cutting. Simply slide the Trucktok tip over your vehicle’s tailpipe, align it for a clean look, and tighten the clamps or bolts for a secure fit. Check clearance to avoid contact with the bumper or nearby components.
TruckTok exhaust tips are designed for 3", 4", and 5" exhaust systems and are commonly used on Cummins, Duramax, and Powerstroke diesel trucks. Fitment depends on your tailpipe’s outside diameter and available clearance, so always measure before ordering.
When selecting an exhaust tip, consider factors like the inlet diameter, the size and shape of the visible outlet, and the space available in your bumper recess. Think about the finish you want, the fastening type, and whether you need a right-hand, left-hand, or offset model. Trucktok tips come in durable stainless steel or sleek matte black, giving you both style and long-lasting performance.

Filter Kits

Common signs of a dirty diesel air filter include black or dark exhaust smoke, reduced engine power, sluggish acceleration, rough idle, increased fuel consumption, and a check engine light. In some cases, a visual inspection will show a darkened or clogged filter element that restricts airflow.
Diesel fuel filter replacement intervals vary by truck platform, engine generation, fuel quality, and driving conditions. We recommend following your vehicle’s OEM maintenance schedule or onboard fuel filter life monitor. Heavy towing, extended idling, poor fuel quality, and dusty operating environments may require earlier service. Symptoms such as hard starting, power loss, or rough operation may indicate the fuel filter should be inspected or replaced. Be sure to match the exact year, make, and engine when selecting a replacement filter.
Trucktok diesel filter kits include a replacement filter along with O-rings, seals, or other installation components when required. Contents vary by application and filter type across Cummins, Powerstroke, and Duramax platforms, so always check the product page for exact specifications.
Start by matching your truck's engine and model year to the product fitment information. Filter requirements can vary between different Cummins, Powerstroke, and Duramax applications. Checking the listed fitment details and OE replacement numbers can help ensure you select the correct filter kit for your vehicle.
Fuel, oil, and air filters do not always need to be replaced at the same time, as service intervals can vary by filter type and application. However, replacing multiple filters during routine maintenance can simplify service and help ensure key engine and fuel system components remain protected.
Common signs of a clogged diesel fuel filter include hard starting, loss of power, rough idle, hesitation under load, and reduced fuel efficiency. In more severe cases, the engine may stall or experience fuel starvation. If these symptoms occur, the fuel filter may need inspection or replacement depending on vehicle condition and service history.
Buying a diesel filter kit helps simplify maintenance by providing matched replacement components in one package. Trucktok kits are designed to reduce compatibility issues by matching Cummins, Powerstroke, and Duramax applications, so users can avoid sourcing individual filters separately and complete routine service more efficiently.

Floor Mats

Trucktok offers all-weather floor mats made from durable TPE material with custom-fit designs for improved interior protection. Features such as raised edges and anti-slip surfaces help contain mud, water, snow, and daily debris while maintaining easy cleaning and long-term durability.
Trucktok floor mats are available for many popular truck platforms, including Chevrolet Silverado, GMC Sierra, Ford F-Series, and RAM models. Fitment depends on factors such as model year, cab style, and interior configuration, so checking vehicle compatibility before purchase is recommended.
All-weather floor mats are designed to handle rain, mud, snow, and daily debris in changing driving conditions. Their raised-edge design helps contain spills and dirt, while durable materials make cleaning quick and simple. They also help protect the vehicle's interior from long-term wear and moisture damage.
Trucktok floor mats use raised-edge, all-weather designs to trap mud, water, and debris before they reach the carpet. This helps keep the interior clean and reduces long-term wear from daily driving conditions.
Most car mats can be cleaned by simply removing them, rinsing with water, and using mild soap for stubborn dirt. Rubber or all-weather mats dry quickly and are designed for easy maintenance compared to carpet mats.
Carpet car mats offer a softer and more premium interior appearance, while rubber car mats are better suited for heavy-duty and all-weather use. Rubber mats are more resistant to water, mud, and stains, making them a practical choice for work trucks, off-road driving, and harsh climates.
When buying car mats, consider fitment, material type, durability, and ease of cleaning. For trucks and daily work use, all-weather mats like Trucktok floor mats are often preferred for their protection and long-term reliability.

Other Questions

You can track your order using the tracking number we provide. If not, please contact us.

Yes, you can contact us and we will give you a discount after knowing the situation.

Yes, we offer certain discounts to wholesalers and auto repair shops.

Powerstroke

Mechanically, some owners discuss removing emissions equipment to improve performance or reliability. In practice, such modifications are usually aimed at reducing soot buildup, lowering intake temperatures, and improving engine response under heavy load. For those who prefer to keep all systems intact, proper maintenance, tuning, and OEM-approved upgrades can help enhance performance and drivability without removing any components.
The primary benefits of modifications like an EGR or DPF delete are often improved throttle response, reduced exhaust restriction, and lower soot accumulation, rather than dramatic raw horsepower gains. Similar improvements can be achieved through maintenance, high-quality fuel, or performance upgrades such as upgraded air intake, intercoolers, turbo improvements, or exhaust systems that work with the existing engine systems.
Removing or modifying the EGR system can reduce soot buildup and improve throttle response under heavy load. However, similar performance and reliability improvements can be achieved through regular EGR maintenance, using high-quality fuel and additives, or upgrading cooling and airflow systems, all while keeping the engine fully intact.
Modifications targeting the DPF generally aim to reduce exhaust restriction or decrease regeneration cycles. Similar benefits, such as smoother operation and improved engine efficiency under load, can be obtained through timely DPF maintenance, using proper low-ash oil and high-quality diesel, keeping the DEF system in good condition, and installing approved upgrades that enhance performance without removing emissions equipment.
A 6.7 PowerStroke delete kit is a set of components designed to remove or bypass the factory emissions systems, such as the EGR, DPF, and associated plumbing, to improve exhaust flow and engine efficiency. Typical components in a kit include block-off plates for the intake and exhaust, replacement pipes or tubing, gaskets, mounting hardware, and sometimes tuning solutions to recalibrate the engine for optimal performance after the system is removed. The kit is designed to simplify exhaust flow and reduce buildup in critical engine areas.
Choosing the best kit depends on your truck’s year, engine configuration, and intended use. Look for kits that are designed specifically for your 6.7 PowerStroke model and include all necessary hardware for installation. Kits that provide clear instructions, high-quality materials, and compatible components help ensure easier installation, smoother engine operation, and reliable performance.
Most comprehensive PowerStroke delete kits include components that address multiple emissions systems, such as the EGR, DPF, and DEF. However, some kits focus only on the EGR system or other specific components. The exact scope depends on the kit design, but the goal is generally to streamline the exhaust and intake pathways and improve engine airflow and response after the system components are removed or bypassed.
Yes, a 6.7 PowerStroke EGR delete kit is designed to bypass or remove the EGR system, which is often the source of carbon and soot buildup in the intake and exhaust. By eliminating the EGR pathway, the kit can reduce clogging issues, improve airflow, and help the engine maintain cleaner operation. It also makes maintenance more straightforward by removing a system prone to buildup over time.

Powerstroke-2

Engines like the 6.0L, 6.4L, and 6.7L Powerstroke see significant improvements with performance parts, from better airflow to optimized emissions systems. Trucktok's Ford performance parts are designed specifically for these engines.
An EGR delete removes the exhaust gas recirculation system to prevent carbon buildup and overheating, improving both performance and engine longevity. Trucktok EGR delete kits are built for precise fitment and consistent performance support.
Some Ford performance parts can improve fuel efficiency by optimizing airflow and reducing restriction. Upgrades like intake systems, exhaust components, and ventilation kits support more efficient combustion, especially under light load. Results vary based on driving habits, engine setup, and vehicle condition.
Ford performance parts help address common issues such as clogged EGR systems, high exhaust gas temperatures, and carbon buildup, improving engine reliability and longevity. Trucktok parts are specifically designed for Ford Powerstroke engines for precise fitment and durability.
The best Ford performance parts for off-road trucks focus on durability, airflow, and heat management. High-flow exhaust components, reinforced intakes, and ventilation kits help reduce restriction and improve reliability in tough conditions. Trucktok off-road solutions are designed to support reliability in demanding terrain and heavy load conditions.
Several Trucktok ford performance parts enhance exhaust sound, including straight pipes, downpipe-back exhaust kits, and high-flow mufflers. These upgrades reduce backpressure, improve exhaust flow, and produce a deeper, more aggressive tone depending on pipe size and system design.
For F-250 owners, the most effective ford performance parts include intake upgrades, exhaust systems, and oil catch can kits. These upgrades improve airflow, reduce carbon buildup, and support smoother engine operation, especially under towing and heavy-duty use. The right upgrades depend on your engine type and performance goals.

Thermal Sentry Series

An EGT sensor monitors exhaust gas temperature in real time and sends data to the ECU. Accurate EGT readings help protect diesel engines, support fuel and emissions control, and reduce the risk of overheating under towing, hauling, or heavy-load driving.
The Ford 6.7L Powerstroke engine uses NTC thermistor-type EGT sensors. Trucktok currently offers high-quality aftermarket replacements compatible with these original part numbers: AC3Z-5J213-C, BC3Z-12B591-B, BC3Z-12B591-C，FC3Z-12B591-A, and HC3Z-5J213-B. Always match the part number before ordering.
You may still be able to drive with a bad EGT sensor, but it is not recommended. A failed sensor can trigger warning lights, poor fuel economy, reduced power, limp mode, regeneration issues, or inaccurate exhaust temperature control. Replace it promptly to protect your engine.
A bad EGT sensor may trigger engine warning lights, cause rough idling, poor fuel economy, or reduced turbo performance. Inconsistent or missing temperature readings in diagnostic tools can also indicate failure. If these signs appear, inspect the sensor and wiring, and replace it promptly to ensure accurate exhaust monitoring and safe engine operation.
Test an EGT sensor with a scan tool by checking live exhaust temperature data, or use a multimeter to measure resistance when applicable. On many NTC-style sensors, resistance drops smoothly as heat rises. A frozen -40°F reading often indicates an open circuit.
EGT sensors are threaded into the exhaust stream, often near the turbo downpipe, DOC, DPF, or SCR section. Many diesel trucks use multiple sensors, sometimes labeled as EGT 11, EGT 12, EGT 13, or EGT 14 in scan tools. Always confirm the exact position by OE part number and vehicle fitment.
Let the exhaust cool, locate the correct sensor port, unplug the old sensor, remove it with the proper wrench, and install the new Trucktok EGT sensor securely. Connect the OE-style plug, clear any codes if needed, and confirm live temperature data after installation.

Wiper Blades

Every order comes as a complete full pair (2 blades total). You will receive 1 x Driver-side wiper blade and 1 x Passenger-side wiper blade, custom-sized and ready to install on your specific truck year and model. No need to buy them separately!

We’ve done the heavy lifting for you. Every single SKU in our StormShield Series is custom laser-fit for specific truck generations. Simply select your Truck’s Year, Make, and Model from our dropdown menu before clicking "Add to Cart." We will ship the exact OEM-matched lengths and connector hooks guaranteed to snap right into your factory wiper arms.

Absolutely no tools and no messy plastic adapters required. Our wipers are engineered with direct OE-matched connection clips. Installation takes less than 15 seconds per side: just click out your old crusty blades and snap our StormShield blades right into place. It’s 100% plug-and-play.

Yes, 100% Street Legal, EPA, and CARB compliant in all 50 states—including California. Unlike heavy engine modifications, our StormShield Wiper Series is a pure safety and maintenance upgrade. We ship daily from our warehouses straight to California driveways with zero restrictions!

Traditional rubber wipers dry out, crack, and start streaking after just one hot summer or freezing storm. TruckTok’s StormShield Series uses advanced marine-grade silicone that outlasts cheap rubber by at least 2X. Plus, our built-in aerodynamic steel frame creates massive high-speed downforce, meaning zero highway chatter or fluttering at 70+ MPH, even in torrential rain.

cold air intake

A cold air intake is an air intake system designed to draw in cooler, denser air from outside the engine bay. Cooler air contains more oxygen, which helps the engine burn fuel more efficiently and respond more smoothly during acceleration and everyday driving.
Most cold air intake kits include an intake pipe, a cold air intake filter, couplers, and mounting hardware. Many setups also add a heat shield, brackets, and vacuum hoses. Trucktok cold air intake kits typically include all required components for a clean, vehicle-specific installation.
A cold air intake filter is typically designed for higher airflow and reusability compared to a factory air filter. It often uses performance media that balances filtration and airflow, supporting smoother breathing while still protecting the engine from dust and debris.
Choose a cold air intake based on your vehicle’s make, model, engine type, and driving needs. Pay attention to proper fitment, filter design, and intake routing. Trucktok offers cold air intake systems built specifically for trucks and diesel engines, helping ensure consistent airflow and dependable daily performance.
Cleaning or replacement intervals depend on driving conditions and filter type. In normal use, filters are checked periodically and serviced when dirt buildup is visible. Dusty or off-road environments may require more frequent inspection to maintain airflow efficiency.
The air intake and filter supply clean air to the engine for combustion. The intake directs airflow efficiently, while the filter removes contaminants. Together, they help maintain consistent engine operation, protect internal components, and support overall performance.
In many cases, a cold air intake can be used without additional tuning. The system is designed to work within factory parameters, focusing on improved airflow and intake efficiency. Some drivers choose tuning for optimization, but it isn’t always required.
A cold air intake is generally considered a bolt-on air intake and filter upgrade. Insurance policies vary, so some owners choose to disclose modifications for clarity, while others do not. It’s mainly about transparency rather than changing how the vehicle is used.

dodge-jeep

A Trucktok Cummins EGR and DPF delete kit typically includes EGR delete components, a DPF delete pipe or race pipe, block-off plates, and necessary hardware such as gaskets, clamps, and fittings depending on the application.
A complete 6.7L Cummins delete setup typically includes EGR and DPF delete components along with a compatible tuning solution. Exact requirements may vary depending on model year, exhaust configuration, and vehicle setup.
Yes. Most 6.7L Cummins EGR and DPF delete setups require a compatible tune or tuner to help prevent fault codes and maintain proper engine operation after emissions components are removed.
Trucktok Cummins delete kits can help improve towing performance by reducing exhaust restrictions, lowering exhaust gas temperatures (EGTs), and allowing the engine to breathe more efficiently. This can result in more consistent power delivery and improved performance under heavy loads.
To choose the right Cummins parts, you should consider your engine model (such as 5.9L or 6.7L), your vehicle year, and your performance goals, including towing, reliability, or power upgrades. Trucktok offers a range of Cummins performance parts designed to match different setups and driving needs.
The best 6.7L Cummins performance upgrades typically include high-flow intake systems, EGR and DPF delete kits, performance exhaust systems, and tuning solutions. These upgrades help improve airflow, reduce exhaust restrictions, and enhance towing performance.
A 6.7L Cummins may go into limp mode without a proper tune if emissions-related components are modified or deleted. The factory ECU is designed to monitor sensor data closely, and when it detects inconsistencies, it can reduce engine power to protect the system. A proper tune helps maintain correct engine operation after performance modifications.

l5p delete kit

The best delete kit for an L5P Duramax depends on your goals—performance, reliability, or off-road use. TruckTok offers high-quality kits engineered for proper fitment, durability, and compatibility with L5P engines. Their kits focus on emissions-intact tuning and hardware solutions that maximize reliability while still improving throttle response, exhaust flow, and overall drivability.
Before removing or modifying any hardware, proper tuning should always be addressed first. In addition to components related to the EGR and DPF systems, adjustments may involve exhaust-related parts in the engine bay and chassis, as well as sensors, fuel injection components, and electronic elements connected to the DEF system. Making these adjustments while all systems are still intact helps improve overall drivability and efficiency while minimizing the risk of engine or electronic issues. Before proceeding with any removal or modification, it’s strongly recommended to understand and follow your local laws and regulations.
Mechanically, a delete kit can reduce soot buildup, improve intake airflow, and enhance throttle response. Many owners report better towing performance, smoother operation, and a cleaner engine environment. TruckTok designs kits to optimize reliability while providing noticeable performance improvements, even without compromising legal compliance.
The L5P Duramax engine was introduced in 2017 and continues in current GM 2500HD and 3500HD trucks. It is known for its robust bottom end, high horsepower potential, and advanced emissions control system, including the EGR, DPF, and CCV systems.
The CCV (Crankcase Ventilation) reroute helps reduce oil buildup in the intake system and prevents excessive pressure in the crankcase. This can lead to a cleaner intake, improved turbo efficiency, and longer engine life. TruckTok’s CCV reroute is designed to integrate seamlessly with the L5P’s hardware and tuning, maintaining reliability while improving overall performance.
While it is possible to install an L5P delete kit yourself, it requires mechanical expertise and proper tools. The installation involves removing or bypassing key emissions components, which can be complex and time-consuming. For the best results, it’s recommended to consult with or hire a professional mechanic to ensure proper installation and avoid potential issues with fitment, performance, or engine management.
Yes, an L5P delete kit can help alleviate some of the common issues associated with the EGR (Exhaust Gas Recirculation) and DPF (Diesel Particulate Filter) systems on newer Duramax engines. By removing or bypassing the EGR and DPF components, the truck may experience fewer regeneration cycles, reduced soot buildup, and more consistent exhaust flow. This can lead to fewer issues with clogging, overheating, and excessive exhaust gas temperatures, improving overall engine performance and reliability.
Yes, installing an L5P delete kit typically requires removing or replacing parts of the factory exhaust system, particularly the DPF and sometimes the EGR system components. Depending on the specific kit, the factory exhaust system may need to be modified or replaced with a delete pipe or other components designed to maintain proper exhaust flow and performance after the emissions systems are removed.

tonneau cove truck bed cover

A tonneau cover is a protective lid that installs over the bed of your pickup truck. TruckTok tonneau covers help secure cargo, shield your gear from rain and UV exposure, and improve the truck’s overall aerodynamics. They come in folding, rolling, and hard-shell designs, giving you options based on how you use your truck bed.
No tonneau cover is truly 100% waterproof, but high-quality models—like TruckTok’s tonneau covers—are highly water-resistant. Proper seals, reinforced edges, and correct installation can significantly reduce water infiltration. While you may see minimal moisture during heavy storms or high-pressure washes, your cargo will stay well protected under normal conditions.
Both options offer distinct advantages depending on how you use your truck. Soft tonneau covers are lightweight, more budget-friendly, and easy to roll or fold for quick access to the bed. Hard tonneau covers—such as TruckTok’s hard folding designs—provide greater durability, enhanced security, and stronger protection against weather and road debris. If you regularly transport tools, equipment, or other valuable cargo, or drive in demanding conditions, a hard folding cover is often the more dependable choice.
Yes. TruckTok tonneau covers are low-maintenance, but regular care helps extend their lifespan. You should clean the cover with mild soap, lubricate hinges or rails if applicable, and ensure the seals stay free of debris. Periodically check clamps and mounting points to maintain proper alignment and prevent water leaks.
A roll-up tonneau cover is designed for daily use and long-term durability. TruckTok roll-up covers are typically constructed with reinforced vinyl or heavy-duty fabric layered over aluminum support rails. These materials are chosen for their flexibility, resistance to tearing, and ability to handle repeated rolling and unrolling without losing shape or function. The combination of lightweight materials and a sturdy frame allows the cover to remain reliable while still being easy to operate.
Many tonneau covers are designed to work alongside common aftermarket truck accessories. Depending on the model, TruckTok tonneau covers can be compatible with bed racks, ladder racks, or cargo management systems that mount to the truck bed rails. Some setups may require specific mounting brackets or low-profile rack designs, so checking accessory compatibility before installation helps ensure a clean and secure fit.
A hard tonneau cover adds an extra layer of protection by creating a solid barrier over the truck bed. TruckTok hard covers are built with rigid panels and secure locking mechanisms that help deter tampering and keep cargo out of sight. When closed and locked, the cover limits access to the bed, making it more difficult for unauthorized entry and providing greater peace of mind when transporting tools, equipment, or personal items.
Roll-up tonneau covers are designed to handle changing weather conditions, including rain and light to moderate snow. TruckTok roll-up covers use sealed edges and tensioned materials to help direct water away from the truck bed. While extreme weather may introduce some moisture in certain situations, proper installation and regular maintenance help the cover maintain reliable protection throughout the year.

trailer hitch

A trailer hitch is designed to connect a trailer using a receiver and ball mount for stable, controlled towing. A tow hook is meant for recovery or pulling a vehicle short distances, often in off-road or emergency situations, not for attaching trailers.
Use a tow hook when you need vehicle recovery, winching, or short pulls where a trailer isn’t involved. Tow hooks are common for off-road use, snow, or roadside assistance, while trailer hitches are intended for hauling loads behind the vehicle.
A heavy duty trailer hitch from Trucktok is designed to handle demanding towing and recovery needs. Support depends on the hitch style and setup—some are built for multi-ball trailer towing, while others focus on off-road recovery strength—making them suitable for work trucks, trailers, and rugged use.
Yes, adjustable trailer hitches are commonly used on lifted trucks. Their height-adjustable design helps keep the trailer level, improves towing balance, and allows one hitch to work with different trailer heights and vehicle modifications.
Trucktok trailer hitch locks are designed to work with most standard 2-inch hitch receivers found on trucks and SUVs. While they fit a wide range of Class III to Class V systems, compatibility depends on the receiver’s design and pin size. Checking the lock specifications ensures a secure and proper fit for your hitch.
Check receiver size, vehicle compatibility, build quality, and intended use. Look at materials, finish, and mounting style, and make sure the product matches how you plan to tow or recover, whether for daily driving, work, or off-road use.
A trailer hitch is typically used as a mounting point for towing accessories or recovery gear. When not towing, it mainly serves as a ready attachment point, offering convenience for drivers who frequently haul trailers or use hitch-mounted equipment.
The three common types are receiver hitches, gooseneck hitches, and fifth wheel hitches. Receiver hitches are the most versatile for everyday towing, while gooseneck and fifth wheel hitches are used for larger trailers and heavier-duty applications.