How it Installation?
Installation instructions
Step 1 :
1.Use a wrench or socket to remove the connector and heat shield.
2.Release the clamp of the intercooler tube and separate boot.
Step 2 :
Remove four 8mm bolts and disconnect the valve, with two screws hidden below.
Step 3 :
1.Install the throttle delete valve bolt and four hexagonal bolts with washers in the installation kit.
2.Reconnect and tighten the intercooler tubes and clamps.
Step 4 :
1.Reinstall the heat shield and connector.
2.Fixed unused throttle valve connection.
Step 5 :
Remove the position of the lower coolant pipe from the hard pipe, use one of the provided hose clamps to secure the provided hose to the hard pipe, and reconnect the large electrical connector to the new bracket. Tie any remaining wiring to the bracket to ensure that it does not Damaged.
Other Related products
Discover unique designs you'll need
EGR Throttle Delete Kit
2013-2018 6.7L RAM Cummins
CCV Crankcase Ventilation
2007.5-2018 6.7L RAM Cummins
EGR Throttle Delete Kit
2007-2009 6.7L RAM Cummins
EGR Throttle Delete Kit
2010-2014 6.7L RAM Cummins
5" Turbo Back DPF Delete Pipe
2013-2018 6.7L RAM Cummins
