跳至内容
Warranty Shipping Contact Reviews Blogs
TruckTok 2013-2018 6.7L Ram Cummins 5" Turbo Back DPF Delete Pipe & EGR Cooler Delete Kit
Brand TruckTok

TruckTok 2013-2018 6.7L Ram Cummins 5" Turbo Back DPF Delete Pipe & EGR Cooler Delete Kit

库存量单位 ER-0256
$867.99 - $867.99
$867.99
$867.99 - $867.99
$867.99

Free Shipping

可用性:
库存，准备发货
  • Material: T-409 stainless steel.
  • 5" Turbo-Back DPF & CAT delete exhaust system-with muffler.
  • Replaces entire exhaust system from turbocharger to tailpipe.
  • Effectively recirculate the engine coolant to maintain the engine temperature at the best performance for inspection.
  • Remove the EGR system can improve the exhaust flow and accelerate the start-up speed of the turbocharger.
  • This system not only sounds great but will improve torque, throttle response and fuel mileage.
  • Fit 2013-2018 Ram Cummins 2500/3500 6.7 diesel truck. (Leaf Spring Or Coil Spring).  Not fit Cab & Chassis Models.

Installation Discussion & Community Support

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Specifications - Click for details

-Fitment:
2013 - 2018 Dodge Ram 2500/3500 Cummins 6.7 Diesel. Crew cab short bed, crew cab long bed & mega cab. Not suitable for commercial type Cab & Chassis trucks. Not suitable for trucks with air suspension.
-Package Includes:
1 * DPF Pipe with muffler.
1 * EGR Block Off Plate with O-Rings
1 * Front Block Off Plate
1 * Rear Block Off Plate
1 * Coolant Standpipe Adapter with O-ring
1 * Locking Collar with Set Screws
1 * Support Backage
1 * Threaded Stud with Flange Nut and Stud Spacer
1 * Coolant Hose
2 * Pipe Clamps
3 * 5/16" Hex Head Bolts
1 * 1/4" Hex Head Bolts
4 * Locking Nuts (1 - Small & 3-Large)
1 * Throttle Valve Delete Tube
1 * Gasket
4 * Flange Bolts
-Feature:
Exhaust material - stainless steel T-409. Aluminized steel is the most popular, but it will rust over time. T-409 stainless steel. Unlike stainless steel T-304, it is still magnetic. So if you are checking to see if you really have stainless steel, keep in mind that the magnet will still stick to it. We recommend using stainless steel if you run your truck regularly on salty winter roads. Use the drop down menu to make your desired selection.
Installation - Installation takes about 1 hour using basic hand tools on your driveway or garage lot. Faster if you have a car elevator. A trim may be required for installation on a shorter wheelbase. Clamps, hangers, and fasteners are included. You may have to reuse some of the factory fasteners.
Fuel mileage - Expect a significant increase in fuel mileage. If your DPF is clogged, you probably average about 13-14 miles per hour. More or less depending on the degree of clogging. After removing the DPF/CAT, expect a combined mileage of 18-19 mpg. Big tires and poor driving habits will result in lower mileage.
Tuner required - Removal of DPF, CAT, SCR and/or DOC includes removal and elimination of emission related sensors. A tuner with DPF removal capability is required to prevent engine warning lights or diagnostic trouble codes. If you don't already have a tuner with DPF removal capability, we recommend the RaceME Ultra.

Legal Disclaimer & Off-Road Use Only Notice

Request a quote