1986-1995 Ford EGR simulator eliminator Block off Plate
Improve the performance of your motor!
Learn More
How it Installation?
Installation instructions
Step 1 :
1.Disconnect both batteries.
2.Use a wrench to disconnect the pipe connecting the bottom of EGR.
Step 2 :
Disconnect the top electrical design of EGR and connect the simulated eliminator provided in the kit to the factory electrical equipment.
Step 3 :
Unscrew the two bolts that secure the EGR valve, remove the EGR valve, and use a scraper to clean the dirt near the hole.
Step 4 :
Fix the sealing plate and high-temperature washer in the original EGR position using the two bolts provided in the kit.
Step 5 :
Install the intake elbow by sliding the tube into the boot.Using supplied M6-1.25x25 Bolts secure the flange to the intake manifold.
Step 6 :
1.Install the bracket. The M10 bolt will be screwed into the support bolt. Secure the transmission dipstick to the bracket using 1/4-20 bolts, nuts, and washers.
2.The bracket will hold the coolant hose connector in place.
Other Related products
Discover unique designs you'll need
Coolant Filtration Kit
2008-2010 6.4L Ford Powerstroke
Exhaust Up-Pipe
2008-2010 6.4L Ford Powerstroke
Exhaust Up-Pipe
2008-2010 6.4L Ford Powerstroke
4" Cat & DPF Delete Pipe
2008-2010 6.4L Ford Powerstroke
5" Dp-Back DPF Delete
2008-2010 6.4L Ford Powerstroke
