![0299 0.png__PID:239de143-93f2-4c2e-852a-92c9e176275d](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0299_0.png?v=1735636496)
How it Installation?
Installation instructions
![0298 1.jpg__PID:3f3d275c-eeb5-4e32-8e3c-63bf0d725861](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0298_1_98f32398-fc7d-4905-b11c-0e0b8c8db825.jpg?v=1735634618)
Step 1 :
1.Unscrew the 4-bolt flange that secures the OEM turbine straight pipe and downpipe. Use a 15mm socket to perform this step. (Note: Keep OEM nuts as they will be used with the new system).
Step 2 :
Install the downpipe#1 and connect the 4-bolt flange of the downpipe to the 4-bolt flange of the turbine straight pipe with bolts.Press the flange downwards to secure the pipeline, but the pipeline can still move. Fix the hangerback with bolts Transmission.
![0298 3.jpg__PID:2e324e3c-63bf-4d72-9861-b938670e27da](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0298_3_84d68b68-3f1f-43f5-b8d1-31b48df57fb5.jpg?v=1735634637)
![0298 4.jpg__PID:0d725861-b938-470e-a7da-c33ee4357e6c](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0298_4_999a438f-5974-420e-8228-043702bc1691.jpg?v=1735634662)
Step 3 :
Install pipe #2 Connect one end of the sloping surface to the tail end of the # 1 downpipe and tighten it loosely with a fixture. Place the hanger together into the OEM rubber hanger.
Step 4 :
Install the muffler replacement pipe #4 in front of the #6 axle pipe and the #7 tailpipe, and select the appropriate extension pipe #5 according to the wheelbase. Cut the extension pipe according to the needs of the vehicle body.
![0274 9.jpg__PID:3261d214-9754-4d65-9b7f-55d5deb1cd81](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0274_9.jpg?v=1735183307)
![0301 6.jpg__PID:c043a243-bc2f-4a39-9a45-283f0eabf41e](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0301_6_3e4c5478-0b5d-4f27-a99a-405107ae318d.jpg?v=1735176085)
Step 5 :
Starting from pipe #1, tighten the vortex belt clamp and continue tightening until the rear connection, checking the gap while tightening.
Step 6 :
1.Install the bracket. The M10 bolt will be screwed into the support bolt. Secure the transmission dipstick to the bracket using 1/4-20 bolts, nuts, and washers.
2.The bracket will hold the coolant hose connector in place.
![0092 6.jpg__PID:69d53a21-0439-4884-b4a8-7ec1a71ab9cd](https://cdn.shopify.com/s/files/1/0579/8861/2179/files/0092_6.jpg?v=1731488437)